Handicrafts today are not just a fashionable hobby. Having studied this skill, you can look stylish and fashionable without spending a lot of money. Schemes are proposed for beginners and just amateurs. They can easily be used to tie a fashionable hat. If something is not clear, video clips with detailed instructions will help you figure it out.

Experienced needlewomen just need to look at the finished product to understand how to knit and how many stitches to cast on.

Before starting, you need to knit a small sample of 10 cm by 10 cm. Measure it with a centimeter tape or ruler. You must clearly understand how many loops are in 1 cm. The knitting density is different for each craftsman. Take head volume measurements. Multiply the number of cm by the number of loops, based on 1 cm according to your sample.

This approach will help to avoid corrections and bandages of the fabric of the future product.

Women's winter hat knitted, photo

This selection offers five options for hand-knitted hats. All of them are simple, even a beginner can cope with such work.

Model 1

Elastic band 2 by 2. Stocking knitted fabric with braids for 2 knits. The thread is coarse, which allows you to knit the product quickly.

Model 2

It looks complicated, but is actually quite simple. Purl three and knit four, twist them every third row.

Model 3

A simple 1 by 1 elastic band. The fabric is made with English elastic.

Model 4

Elastic band 1 by 1. The fabric is regular stockinette stitch. The hat is decorated with a crocheted bow.

Model 5

A completely simple model. Elastic band 1 x 1. Garter stitch fabric.

How to knit a women's winter hat, patterns with descriptions for beginners

Option 1

An interesting warm hat with a very simple pattern. Elastic band 1 by 1. The entire fabric is stocking stitch with elements of braids, flagella and bumps. The top of the product is reduced by shortening the loops starting from the third part of the product. The model ends with a pompom.

Option 2

The product requires patience and perseverance. It will not be easy for a beginner to cope the first time. The entire hat is made with complex knitting. It consists only of braids, flagella with 6 facial loops, you need to twist 3 by 3 P. We twist in every eighth row.

Stylish women's winter hat with knitting needles, diagrams with description

Model 1

For such a hat you will need 150 grams of thread, knitting needles with fishing line, number 3 - for making elastic, number 5 - for fabric. The fabric is of medium density, cast on 98 p. The headdress is knitted with two twisted threads, a skein of 135 grams, 50 meters long.

The base is knitted with an elastic band 2 by 2, with a height of at least 6 cm. Change the thickness of the knitting needles to a larger number.

Let's move on to the decorative part of the canvas.

2*, 4\,2*,4\,2*, this sequence must be continued until the final P end of the P LP.
Knit TP the way they look at P.

We continue repeating the pattern until the sixth P, twist the P braids on the seventh (for a visual aid, watch the videos). You can throw P onto a pin or auxiliary needle.

Then we move on to TP. We remember that it is knitted the way P looks. On the LP we continue the pattern from the beginning.

After approximately 15 cm of knitted fabric, or three braids, we begin to reduce the size of the product. It is reduced by shortening * P, knitting two into one, through two braids in each P TP.

TP the way they look at P. We no longer make flagella on the LP. Using exactly the same scheme, connect * with \. To reduce you need 5 R by 14 P, the remaining 28 P are dropped onto the thread and pulled together. The top is ready. Clip on the pompom.

You got a brand new headdress at a minimum cost.

Model 2

For such a hat you will need 255 grams of thread, number 5 knitting needles with fishing line for the base, number 6 for the fabric. The fabric is of medium density, cast on 72 p. The headdress is knitted with two twisted threads, a skein of 85 grams, 135 meters long.

We calculate so that from 15 P to 20 R\ we get 10 cm of canvas.

We knit the base 8 cm, alternating 1* and 1\. On the LP we change the knitting needle.

1 R - knit LP 3\, 3\ to 3\ twist, continue this sequence until the end of R.
2,4,6,8,10,12,14,16,18,20,22,24,26,28 R - we knit TP as they look at P.

Don’t forget that the headdress is seamless, we knit it in a circle.

3 R - we knit the way they look at P.
5 Р – twist 3\ to 3\, 3\ repeat the pattern until the end of Р.
7 R - we knit the way they look at P.
9 Р – knit 3\, twist 3\ by 3\, repeat the pattern until the end of Р.
11 R – we knit the way they look at P.
13 Р – twist 3\ to 3\, 3\ repeat the pattern until the end of Р.
15R – we knit the way they look at P.
17 R – knit 3\, twist 3\ by 3\, repeat the pattern until the end of R.
19 R – we knit the way they look at P.
21 Р – twist 3\ to 3\, 3\ repeat the pattern until the end of Р.
23 R – we knit the way they look at P.
25 R – knit 3\, twist 3\ by 3\, repeat the pattern until the end of R.
27 R - we knit the way they look at P.

We begin to round the headdress:

29 R – reduce by connecting 3\ in 1 P, knit 6\, continue to the end of the R. Remove to the end of the R 24 P.
30 R - we knit it the way they look at P.
31 R – knit 1\, reduce by connecting 3\ in 1 P, 3\ in 1 P, continue until the end of R. Remove 24 P to the end.
32 R - we knit the way they look at P.
33 R – we drop the remaining P onto a thread and tighten it.

We grab the pompom.

How to make a pompom correctly:

Wrap your palm in an unfolded state with a thread 60 times. The beginning and end of the thread should be left longer. Carefully remove the skein, rewind it with a thread in the middle, and tie the knots tightly. We cut all double threads. We form the correct ball.

Winter fashionable women's winter hat with knitting needles, diagrams with description

Model 1

The headdress is made in a circle. This product requires at least 300 grams of thread, 285 meters long.

For the base you need to cast on 77 P, use knitting needles number 5:

We alternate two P * and \, repeat four times.

Let's start knitting the decorative part:

6 R/P.
7, 9 Р 2\, 5 * continue until the end of Р.
8.10 R 2 *, 5 \ continue until the end of R.
11 R swap the fifth \ and first * with the first * and first \ P, knit the fifth * and first \, from the next pattern the first * and first \ P, continue to the end of the R.
12 R how the loops look.
6 R\P.
The pattern is repeated from the seventh R. We repeat the pattern 4 times in total.

1 R along the LP you need to knit three P in 1 every 4 \. Thus, P is reduced by 22 P. Only 55 P remain
2 R per
3 R along the LP need to be knitted 1\, 4 P in 1\, continue until the end of the R. Thus, R is reduced by 33 P. 22 P remain.
4 R we drop all the P onto one thread, pull it tightly. We hide the tail from the thread inside the headdress.

We attach a pompom to the left side.

Marking - inside out | front, TP - back side, LP - front side, R - row, P - loop.

Model 2

The fabric of the headdress is knitted crosswise. It is not solid, it has a seam. For knitting, knitting needles number 10 are used. You need 110 grams of bulk yarn, 100 m long.

Marking * wrong side \ front side, TP - back side, LP - front side, R - row, P - loop.

For the base you need to dial 34 P.

Mating one R *, the second R \. We alternate eight times
We knit 8 R again, alternating R * with R \.
9 R with the first loop we connect all the side inner P in 1 P.

There should be five repetitions of 8 R. Connections along the inner edge in 1 R also 5 times.

In row 40 P we close. Sew the side seams.

Beautiful women's winter hat with knitting needles, diagrams with description

Model 1

A very delicate and stylish pattern of the cap will add romance to your look. For knitting you need to use a thread of medium thickness. The knitting should be tight.

The marking for this scheme is quite simple, it contains a large number of additions and decreases of P. » _ » it's from. P. » | "This is persons. P.

The base of the product is knitted 5 cm, from P 2 _ to 2 |. To do this, we use knitting needles number 3. After the warp, change them to number 5.

The knitting is tight, for such a hat you need to dial 96 P.

After knitting 15-17 cm in height, we begin to decrease P.

1 R S LP decreases » | » P by connecting 4 P into 1 P. By the end of P, the number of P will be reduced by 18, and will be 78 P.
2 R we knit the way they look P
3 R we decrease "_" by connecting 4 P into 1 P. » | "We also reduce 4 P in 1 P. By the end of P, the number of P will be reduced by 36, and will be 42 P.
We knit 4 R the way they look at P.
5 R we subtract "_" by connecting 3 sts to 1 st. By the end of the P there will be 14 sts left. We collect them on a thread, pull it tightly, and hide the tails.

Model 2

This hat is perfect for both young girls and older ladies. It is made with a very simple knit. A novice needlewoman can handle it.

Markings and designations used in the work:

Model 3

The design of this hat is particularly light and charming. In such a headdress frosts are not scary. Even a beginner can handle the work; a detailed description will help prevent mistakes.

Let's move on to knitting the fabric and the base of the hat:

The next stage will be the formation of the rounding of the headdress. To do this, you need to gradually decrease P by P:

We leave a long thread, drop all the Ps onto it, pull it tightly, tie a knot, and hide the tail.

Women's winter hat with a lapel, knitting patterns with explanations

Model 1

The hat is a simple knit, insulated with a lapel, thanks to which your ears will be warm in the winter cold. The model can be knitted with braids, with a regular thick English elastic band.

For the base you need to dial 98 P. The height of the base is knitted based on your desire, but not less than 7-8 cm for a beautiful lapel. Next we knit one R *. After this P we move on to knitting the base for the future fabric 8-9 cm. Make the elastic 2 * by 2 \ P.

Do not forget that the first P is always simply removed, the last one is always *.

The fabric of the cap is made with English elastic. After we have knitted 15-17 cm from the lapel, we begin to decrease the P and form a rounded part of the top of the product.

To do this, according to the LP, we divide the number of P into 6 parts, in the middle of each we reduce 5 P in 1 P. The P will decrease by 24 P, the number of remaining P will become 74 P.

We knit TP the way they look at P.
We reduce the next P along the LP in 6 parts by reducing 5 P in 1 P. The P will be reduced by 24 P, the number of remaining P will become 50 P.
We knit TP the way they look at P.
We reduce the next P along the LP in 6 parts by cutting 5 P into 1 P. The P will be reduced by 24 P, the number of remaining P will become 26 P. Cut off the long thread.

Using the TP, we drop the P onto a thread, pull it tightly, tie a knot, and hide the tail. We connect the edges of the product using a needle or hook. The seam must be neat.

Model 2

The hat is knitted from a coarse thread on large sp., it is better to choose between numbers 5-7. There should be no holes between the Ps, you need to knit tightly.

The cap is quite voluminous, for the base you need to dial 90 P. The height of the base before the lapel is 7-8 cm, after turning into the inside of the product it is always 1-2 cm more. The base pattern is knitted 2* by 2\P. Before you start knitting the inner base you need to work one P*P.

If you knit according to the proposed pattern and increase after 1 stitch, the product will be too voluminous. It is best to do it after 3-5 P.

Try knitting a small sample of 15 P by 15 R. This way you can choose the desired volume of the cap for yourself.

The next step will be rounding the top of the future product. To do this, we adhere to the following scheme:

A wonderful, and most importantly warm winter product is ready. The P of the last P needs to be dropped on a string. It needs to be left longer. After the P is dropped, pull it off and tie a tight knot. Using the same thread, sew the two edges of the product.

Remember the neatness and grace of the seam.

The top can be decorated with a pompom.

Knitted hats for women: patterns, descriptions, modern models

Three reasons why you need to learn how to knit hats:

First: Today it is difficult to find a knitted hat made from natural yarn in stores. At best, it will be wool blend with 50% acrylic, but, alas, you will not find 100% alpaca or merino wool with a touch of silk. But in stores you can easily buy wool with the desired composition and knit a hat for yourself without synthetics.

Second: it's all about the style. To find a hat model that suits you, you need to visit all the stores in the city, is this familiar to you? Isn’t it easier to buy yarn and knit a hat with your own hands according to the description from the website? The Kolibri website presents many modern models of knitted hats with descriptions in Russian.

Third: A knitted hat is the perfect gift for a loved one. For mom or grandma, brother or sister, dad or dear husband: a knitted hat with knitting needles with your own hands will give them a piece of the warmth of your hands, and will be the perfect way to express your concern for loved ones.

I wish you easy stitches and successful knitting with the Kolibri website!

A beautiful and fashionable women's hat is not necessarily something expensive bought in a store. You can create it with your own hands, having only 150 grams of good yarn and knitting needles. Winter and autumn hats require not only aesthetics, but also the ability to retain heat by letting in the right amount of air. That is, to...

Winter won't take you by surprise if you know how to knit! We will also come to your aid by providing a drawing and diagram for a beautiful and easy-to-make hat with a lapel, decorated with a braid pattern. To knit the hat, yarn consisting of 100% cashmere is used. This means you will be warm and comfortable...

Are you planning to buy a warm hat for the winter? Why not knit it yourself? There is an interesting and very fashionable model, with a cute pattern. Think it's too difficult? Not at all. Simple and familiar techniques are used here. And the amount of work is not at all large. You will definitely be in time for the coming cold weather, even...

A warm hat for the winter does not have to be fur and very expensive. There are many options for knitted products in which autumn and winter will be spent in an atmosphere of warmth and comfort. This model, decorated with an original leaf pattern, is quite capable of warming you up. The main thing is to choose good yarn. Woolen wool may be suitable for this...

We knit an excellent autumn-winter women's hat with a simple but original pattern. Doing this kind of work takes a minimum of time, but you get a wonderful, warm and very comfortable thing. It seems thin, but thanks to the natural wool and mohair yarn used, it turns out to be quite dense. You need to try to freeze in such a hat. However, she doesn’t...

A two-tone wool hat like this looks not only beautiful and fashionable, but also very unusual. Knitting with an elastic band is not difficult. You yourself know this very well. And if not, you will quickly understand it by looking at the job description. As you can see, you only need a certain amount of wool yarn in two colors (gray and...

A warm and very comfortable woolen hat for a girl, decorated with an original pattern of intertwined braids and plaits. Knitting such a pattern is much easier than you might think by looking at the picture. Standard knitting elements are used. Therefore, even a beginner knitter will not have any difficulties. At the same time, the hat turns out to be quite modern and not at all old-fashioned. ...

For every representative of the fair sex, a knitted hat is not just a mandatory wardrobe attribute that helps to keep warm, but also an integral component of a stylish winter look. You should choose a knitted accessory based on the following criteria: color scheme, material, style, accompanying pattern/ornament . You can find out below how to knit a hat yourself with knitting needles for a woman and develop new models for 2018-2019, focusing on elastic patterns and photos.

Knitted hats for women 2018-2019 for the winter from thick yarn

Today, being fashionable and attractive while maintaining your unique individuality is not an easy task. This is why every girl begins to choose a hat long before the onset of cold weather: aesthetics should not become a cause of discomfort, it must certainly look elegant, but at the same time remain practical and comfortable.

Fashionable hats made with large knitting look very interesting. Such products are incredibly warm and can be worn for several seasons.

ABOUT The volume adds casualness to the look, without compromising the standards of comfort during wear. In order to create a truly unique and unique product, you should resort to handmade work. Experienced needlewomen can bring to life the most daring ideas and decorate a hat with prints and complex patterns.

Beginners should follow the patterns given in magazines or step-by-step video tutorials in order to understand how to knit a voluminous hat for a woman.

Voluminous knitted items, which are at the peak of popularity this season, along with items made in an oversized style, can be made in a casual, sporty, as well as business and romantic style. The expected trend characterizing the new 2018 models is the return of sophisticated feminine looks.

Today, the most current models of knitted hats made from thick yarn are:

with lapels (like a cap, stocking or regular knit, without accompanying ornaments and decorations, double or single);
beanie hat;
"marshmallow";
hat with ear flaps;
snood hat;
beret;
cap;
hat;
"turban"/"turban".

A practical and comfortable winter headdress made of thick threads, with their proper selection, can advantageously focus attention on the fragility of the figure and balance the proportions.

Products may have the following characteristic features:

for knitting, acrylic or wool threads should be used;
lapels or intricate patterns in the form of braids and bindings can add additional volume;
the undisputed classics are still in trend: black, white, gray colors;
fashionistas who prefer bright colors will like a hat made of unevenly colored yarn or threads of different shades.

Young craftswomen who want to get away from the ordinary and the classics can create models with appliqués (bulky glued inscriptions, embroidery, knitting), which will look best when placed on the sides of the products.

When thinking about decorating knitted hats, you should take into account the following interesting details:

pom-poms (various sizes);
ears (this trend is very original, attracts attention, is typical for younger representatives of the fair sex) and tassels;
rhinestones, spikes, sequins, stones;
veil;
visor (a knitted product, similar to a cap, can perfectly emphasize not only the chic of a metropolis, but also a sporty one).

When choosing the color scheme of a product, you should not adhere to certain standards. Knitted hats made from large yarn can be in completely different shades: pastel, classic, scarlet, yellow, green.

Gradient transitions, as well as monochrome and combined designs, are still relevant.

As you know, pattern is an integral component of all knitted items. This season, openwork braids with large knitting, as well as complex ornaments, are relevant. Of course, such schemes will only be feasible for experienced needlewomen. Beginners can train with an English elastic band (combining it with thick yarn will add the necessary volume to the product).

Knitted hats for women for the winter made of mohair

Mohair is one of the most popular materials for making knitted hats; it is considered a timeless classic. It retains heat perfectly, does not cause allergic reactions, is characterized by extreme lightness and strength, it can be easily washed without fading during washing (translated from Arabic, mohair means “best”, “chosen”).

Do you know how to knit?
Vote

A hat with rolled edges is a favorite accessory of fashionistas who prefer street style. Bulky mohair hats have carved out a strong niche in the fashion industry. The material can be painted in any color; it does not lose its properties, maintaining elasticity and natural shine.

A product made of mohair has low thermal conductivity and retains heat excellently.

A knitted mohair hat can complement almost any look; its fluffy texture can refresh the appearance, adding mystery to it.

New handmade knitted hats

The new 2019 models are very similar to the previous year. The priority is: comfort, warmth, coziness, convenience and versatility. A beautiful knitted hat should fit perfectly with a coat, a down jacket, and a fur coat. Otherwise, you can create several models specific to different .

Chunky knit models, classic and conservative, along with original and even shocking ones, are still at their peak. Jewelry is definitely welcome, especially if you are young, playful and full of sass.

New models for the coming season are presented in a huge variety:

loose and tight-fitting (depending on the features of the face, skin color and hair);
simple and laconic or, on the contrary, supplemented with third-party elements: lapels, ears: visor, pompoms. When combining a hat with outerwear, you need to adhere to the following principle: the more decorated the accessory, the more conservative the second item of clothing should be. Only by following such a postulate can you recreate a stylish and harmonious image;
knitted with a simple satin stitch (purl/knit), English elastic, or containing unique decorating methods: braids, plaits, bumps, cross patterns.

Thick yarn is the trend of the coming season

The hat, made of thick yarn, is a unique find among fashion lovers. Its main advantage lies in the fact that when creating it it is not at all necessary to use complex schemes and original patterns to give the product gloss and completeness. Large knitting is a wardrobe decoration in itself. The most successful look would be one that includes such a headdress and a demi-season parka or a voluminous coat in an oversized style.

However, romantic people and lovers of tenderness can also find a model to their liking.

To create it you will need:

thick yarn (100% wool 80m/50gram);
knitting needles No. 4.5, No. 6;

In order to correctly knit such a popular pattern, you need to cast on 75 stitches on 4.5 knitting needles and knit an elastic band two by two 8 cm high (alternating 2 knits and 2 purls).

Description of work:

To add bagginess after the elastic, add 16 stitches evenly. If you want to knit a not very massive headdress, then add 5-8 loops or don’t do it at all.
We switch to knitting needles No. 6 and knit 3 rows with purl stitch on the front side.

Wrong side:

1r. (ls) - purl loops;
2 rub. (is) - facial.

Front side:

1r. (ls) - facial;

2 rub. (is) - purl.

From the beginning of knitting, you need to knit 28cm, then begin to form the crown. To do this, you need to knit all the loops 2 together, ultimately leaving 41 loops. After one row we repeat the same thing. The remaining ones are tied together with thread.

New knitted hats 2018-2019 (patterns) for young people

A knitted hat is a stylish women's accessory. Its wise choice will help you create a stylish and fashionable winter look. In the coming season, a wide variety of models are popular, among which every representative of the fair sex will be able to find something to their liking.

Turban hat

Hats made like a turban add an oriental charm to the look. These headdresses are not so intricate, but at the same time they are moderately voluminous due to the flowing folds and look amazing on the head. It is worth noting that this accessory does not go well with all outerwear, so when creating an image, try to think through all the details as carefully as possible.

You can knit a turban hat with knitting needles for a woman in one evening; the main thing is to carefully study the patterns given in magazines presenting new models for 2018-2019.

This season, fashionable turbans are presented in various colors: black, sapphire, burgundy, emerald, gray. To liven it up and make it even more unique, you can decorate the front of the hat with a large brooch or an eye-catching metal buckle.

Let's give an example of a turban design with a raised elastic band and voluminous folds. To work you will need:

100 grams of wool;
knitting needles No. 5.

Description of work:

For the sample we cast on 24 loops: 1st row - alternate 1 purl loop and 2 knit stitches.We knit the 2nd row and all even rows according to the pattern.3rd row - 1 purl loop, then we hook the 2nd knit loop to the back wall, then, without throwing it off the knitting needle, the 1st knit loop to the front.The 5th row starts from the third row.
Knitting density: 1 cm = 1.5 loops. The raised elastic band is designed for the number of loops divided by 3. The hat must be knitted from the back of the head. For an accessory of size 56, you need to cast on 18 loops (about 12 cm) and knit 4 cm with a relief elastic band. Next, following the same pattern, we simultaneously make 5 additions each time from the front side (the addition is a yarn over to itself, which is knitted from the wrong side with a front loop behind the back wall).
When there are 11 purl loops in each track, and 6 along the edges (with the exception of edge stitches), no more additions should be made. There should be 68 loops on the knitting needle (42 cm), 16 cm high.
Next, 5-6 cm are knitted evenly and a gradual decrease begins: in each front row 5 times, 2 are knitted together purlwise (similar to increases). You need to shorten the loops until there are 18 loops on the knitting needle again. The loops are divided in half and tied separately: each half of the rim is 28-29 cm long, then placed crosswise. The ends are sewn together, the headband is sewn on.

More detailed and varied schemes for 2019 are available on specialized websites

Snood hat

Knitting a fashionable snood hat with knitting needles for a woman will not be difficult even for beginners. This chunky knit model, which has become in demand, looks more like a scarf, but it looks elegant and will keep you warm even in the most severe frost.

To work you will need:

200 g yarn;
circular knitting needles No. 5.

Description of work:

First of all, you need to decide on the width and height of the product. We cast on the required number of loops on circular knitting needles. The proposed model can be made with a Polish elastic band (this is a very simple pattern even for beginners).

We connect the resulting chain of loops into a circle and begin knitting:

1st row - alternate 3 knit stitches with one purl stitch;
2nd row - 2 knit stitches, 1 purl stitch, 1 knit stitch;
3rd row - similar to the first;
4th row - similar to the second.

Universal hat with earflaps

The women's knitted hat with earflaps is one of the well-deserved new products of the 2018 season, which has gained popularity among young people. A headdress looks most stylish if it is decorated with textured patterns: braids, ornaments, cones, openwork embroidery, rhinestones, abstract prints.

To work based on 54 cm (head volume) you will need:

250 g yarn;
knitting needles No. 4.

The product can be knitted in two threads.

Description of work (ears):

We cast on 6 loops and begin to make a garter stitch pattern, adding 6 times along both edges every two rows along the loop. Then we knit the next 14 rows straight. If you add more loops, the eye will be much wider, and a larger number of rows will affect its length.

After two identical ears are knitted, you can proceed to the hat itself.

Description of work (earflap hat):

Now you need to assemble everything into one product: we cast on a long knitting needle alternately from the ears and new ones for knitting the front and back parts of the headdress. Note! At first, the back of the earflaps will slowly expand, and eventually will be formed from two parts, fastened with a mattress seam.
Next, you need to add 1 loop, knit the front loops of one eyelet and cast on another 20 loops for the front of the hat, knitting the second eyelet and casting on 1 loop. Add stitches to widen the back side every other row on both sides once with 2 stitches and once with 3 stitches (this will make 8 rows and will be the full width of the hat). In order to regulate it, you can add more loops during knitting.
In total you need to knit about 16 rows, which will ultimately make up the height of the hat before tapering towards the crown. The reduction must be performed as follows: 1 chrome. loop, 5 knit, 2 loops with a slant to the right, 2 knit, 2 loops with a slant to the left, 5 knit, 1 chrome. You need to decrease the loops three more times every couple of rows, and pull off the remaining loops after two rows. The hat is sewn at the back using a mattress stitch.
For the front lapel, you need to cast on 20 loops along the edge and knit in garter stitch to the required height, then close all the loops, and attach the lapel in the desired way. For braids, we cut 18 meter-long threads, which need to be folded in half and threaded through the bottom of the ears, and then braided into braids.

Volumetric hat with knitting needles and snood

A set consisting of a voluminous hat and a snood made in a similar style can add harmony and style to the image. The following combination options are acceptable:

a hat and snood made of thick threads, made in the same pattern and in the same color scheme;
Products of different colors and designs form an organic duet.

DIY beanie hat, diagrams

The beanie hat is a classic accessory that incorporates the latest fashion trends. Being one of the most popular models of the 2018-2019 season, this comfortable and very warm item has occupied a strong niche among the fair sex: it can ideally complement both a fur coat and a sports down jacket.

The classic version of the beanie hat is similar to an elongated cap or stocking, and is made with both simple types of knitting: elastic, stocking, scarf, and complex patterns. If you are new to needlework and don’t know how to knit a hat with beanie knitting needles for a woman, then you should pay attention to the following knitting pattern with a detailed description. The key point before work is the correct choice of color,

A headdress knitted with garter stitch is the simplest and most understandable for beginner needlewomen.

Necessary materials:

dense wool blend yarn 100m/100g;
knitting needles No. 5;
needle with a wide eye;
scissors.

Description of work:

We cast on 50 loops with an auxiliary thread on knitting needles No. 5 and knit 2 rows. Next, we cut off the thread, at the end we will unravel it, knit a couple of whole rows again and start knitting shortened ones (this is necessary to round the crown).

The diagram looks like this:

We remove the first loop (edge) and knit the entire row from the beginning to the crown, leaving the remaining 6 loops.
Now you need to turn the knitting and continue in the opposite direction so that a hole does not form at the turning point. To do this, we twist a loop out of the six remaining poles.
We transfer the loop from the left knitting needle to the right, leaving the working thread below under the left knitting needle.
We throw the working thread so that it is above the left knitting needle.
We return the removed loop back - we get an entwined one.
Turn the knitting back. Without touching the resulting loop, we knit a row from the top to the beginning. We knit the last loop knit or purl. The first shortened row is ready.
In the next row we wrap the fifth loop in the same way, then the fourth and so on. A total of six loops are obtained, which subsequently form a wedge of 12 rows, tapering towards the crown.
We knit the second wedge and all subsequent ones exactly like the first. A total of 12 wedges are needed.
When unstretched, the diameter of the cap is about 54 cm, height - 30 cm.

Important! To ensure that the edge of the headdress, which will encircle the oval of the face, does not stretch and does not require crocheting, you should knit the edge and last loops as tightly as possible.

The beanie hat is ready, all that remains is to sew it. To do this, unravel the auxiliary thread and sew the open loops together using a loop-to-loop stitch. You can do this either with a closed edge or with a regular seam. Knitting a beanie hat is not difficult, especially if you strictly follow the pattern and be careful.

With the approaching cold weather, it is necessary to quickly warm up and, finally, knit a hat for a woman: new 2017 models, diagrams, master classes are already waiting for your hardworking hands and your creative attention.

2017 is coming to an end and 2018 is confidently knocking on our doors. For some it will bring long-awaited changes, for others - joyful hopes and opportunities. Women prepare for the New Year in their own way: they update their wardrobe. And the first thing the beautiful fashionista will tell us in 2018 is, of course, what hats should you wear next winter?.

Handicraftswomen are the luckiest of all, because they can create incredible knitted masterpieces with their own hands. Especially for you, craftswomen, present and future, - knitting hats for women. We will look at the 2017 models with knitting descriptions immediately, and also look into the near future - into 2018, and find out which hats will be in fashion. After all, winter is long enough for try different styles of hats on yourself or knit a gift for your loved ones, relatives and friends.

Knitted hat with braids, leaves, large knitting, delicate openwork and bright ornaments - all this can be made with your own hands. It is enough to know the pattern, choose a pattern, purchase yarn and the necessary tools.

A wonderful world opens up before you, called “Knitting hats for women”; fashionable models of 2017 with descriptions and recommendations from stylists are already at your service.

New models of hats delight with both their style and color scheme. , or a fashionable ombre color – choose to suit your taste.

Volumetric knitting is possible work with regular purl stitch. The main thing is to choose the color well. Brown and green colors, as well as their melange weave, are in fashion.

Mustard also in trend this winter.

Winter hats can be varied with bright accents– it’s not all right to wear gray in such cold weather.

Do you know what you can do yourself?

For girls who don’t want to put up with cloudy weather - bright hats for a good mood. Look, spring will begin soon.

Knitting a hat with knitting needles: patterns of new products 2017-2018

We've looked at hat models that will make you feel warm and confident. Now let’s try to make hats together with knitting needles: new 2017 knitting patterns will help you cope with this task. we told and showed earlier, but right now - new items with beautiful patterns and simple execution.

First We will knit a delicate hat with circular knitting needles, starting with an Italian set of loops.

Bright beret for cloudy weather to give yourself a spring mood.

We want to demonstrate very stylish knitted women's hats winter 2017-2018 with diagrams. Knitting with knitting needles itself will not be difficult. Read the description.

From plain models let's move on to knitting jacquard pattern, which always looks very harmonious and stylish in winter.

Hat with knitted flower- for special occasions and chic outfits.

With a playful red and white color scheme and a fluffy pom-pom, this hat perfect for Christmas.

Knitted hat with lapel is gaining popularity this season. Choose bright colors if you want to stand out from the crowd.

And this one small master class will help craftswomen who often practice knitting hats for women. You can view the description and diagrams for free right now.

Cozy hat with braids– current pattern and fashionable colors.

Leaf pattern in two versions– stylish and simple.

Simple stockinette knitting looks very elegant if you choose bright yarn.

Very elegant ladies choose.

The hats that we have presented to you can find their way into your wardrobe after just a few days of painstaking work. To consolidate success, We suggest you go to watch the video, in which experienced craftswomen will tell you about their masterpieces.

Knitted hats winter 2018: warm models and fashionable styles

We have already told you about such an indispensable accessory as knitted hats 2017-2018 with knitting patterns. Women's with descriptions and photos on this page are present in abundance. On the eve of winter, I would like to talk about future current models, because the new season has some pleasant surprises in store for us.

Loved by many beanie hat will continue his journey in the fashion world in 2018.

Can diversify the color scheme, if you already have classic black or white hats of this model.

Increasingly, knitted hats with a minimum number of patterns have begun to appear on the Internet. They can be knitted with stockinette or garter stitch, with a simple or English elastic band, with simple strands, small patterns on the canvas or without them at all. It is for lovers of such hats that we have collected several stylish and fashion models.

Two-tone knitted hat with fur pompom

Hat with a triangular pattern on the front fabric

The pattern consists of 36 loops, this is 1 repeat. Those. To knit a hat you need to repeat the rapport 2 times. Description and diagram of the header from olga_ipaeva_knit. You can vary the width of the hat yourself by increasing or decreasing the number of loops between crossed loops. The hat in the photo is knitted from Gazzal Rock-n-Roll in 2 threads, on knitting needles 3 and 4.5. Cover the top of the head as in a regular 4-blade hat.

Knitted hat with simple plaits

This beautiful 100% Italian Merino beanie is sure to keep you warm on those cold fall days. It can also be complemented with a knitted or fur pompom.

— Yarn “Mambo” Seam 100 grams,
— Circular knitting needles 40 cm No. 4 and No. 5,
— Stocking needles No. 5.

Cast on 80 stitches on size 4 circular needles. Close the circle and knit 1x1 rib for 14 rows.
In the last row, increase 11 stitches evenly.
Switch to needles No. 5 and then knit according to the pattern:
Row 1: * k8 sts, purl 2 sts, slip 1 st without knitting, purl 2 sts. * - repeat until the end of the row.
Row 2: * K8, P2, K1, P2. * - repeat until the end of the row.
Row 3: * k8 sts, purl 2 sts, slip 1 st without knitting, purl 2 sts. * - repeat until the end of the row.
Row 4: * Slip 4 stitches onto an auxiliary needle before work, then knit 4 stitches, return the removed stitches to the knitting needle and knit them, purl 2, knit 1. p., 2 p.p. * - repeat until the end of the row.
Row 5: * k8 sts, purl 2 sts, slip 1 st without knitting, purl 2 sts. * - repeat until the end of the row.
Row 6: * K8, P2, K1, P2. * - repeat until the end of the row.
Row 7: * K8 sts, purl 2 sts, slip 1 st without knitting, purl 2 sts. * - repeat until the end of the row.
Row 8: * K8 sts, purl 2 sts, slip 1 st without knitting, purl 2 sts. * - repeat until the end of the row.
Row 9: * Slip 4 stitches onto an auxiliary needle before work, then knit 4 stitches, return the removed stitches to the knitting needle and knit them, purl 2, knit 1. p., 2 p.p. * - repeat until the end of the row.
Next, repeat rows 5 to 9 four times.
Switch to double needles and start shaping the crown. To do this, knit every 4th and 5th stitch together. After 2 rows every 3rd and 4th. When there are only a few stitches left on the knitting needles, tighten them with thread.

Knitted hat with a relief pattern of strands

Cap with simple braids 1

Yarn ODETTE 50g / 90m,
Composition: 30% viscose, 10% angora, 15% merino wool, 45% acrylic, 80 grams.
Knitting needles: 3.25 (for elastic) and 4.5 (for main fabric)

I knitted the hat in turning rows. For an eight-year-old child, I cast on 106 stitches (of which 2 edge stitches) on knitting needles No. 3.25, knitted 14 rows with a 1x1 elastic band, and in the last row made 1 increase = 107 stitches in total. Then I switched to 4.5 knitting needles. The author of the cap is Liydmilka from SM

Pattern diagram:

Pattern for rotating knitting a hat; for circular knitting you just need to remove the edge stitches - the 1st and 23rd loops

Cap with simple braids 2

The hat begins by knitting an elastic band with 2x2 thin knitting needles. The elastic band is knitted to the desired length, then switch to knitting needles 1.5 times thicker and knit according to the pattern.

Pattern diagram, as an option:

The pattern shows the front and back rows. The width of the motif is 17 loops! Repeat in height from the 1st to the 8th row!

Symbols for the diagram:

EMPTY CELL - purl loop (purl in knit rows, knit in purl rows)

knit (knit in front rows, purl in purl rows)

Cross 6 loops to the left (leave 3 loops on an auxiliary needle before work

Cross 6 loops to the right (leave 3 loops on an auxiliary needle at work , knit the next 3 loops, then 3 loops with aux. knitting needles)

Remove the loop without knitting, the working thread is BEHIND the work!

Using the example of a hat, a simple braid is knitted with 4 stitches, then 2 purl stitches, in the middle 2 knit stitches, between the braids a garter stitch of 2 stitches. In general, in the photo of the hat everything is visible without explanation.

Meet the Dawn hat and mittens set by DROPS Design

Sizes: S/M - M/L
Head size: approx. 54/56 - 56/58 cm
Mittens (length): approx. 28-30 cm.

For the entire set you will need yarn: DROPS SKY (alpaca, polyamide, wool; 50g=190mt) 200-200 grams each, color 13 (light jeans blue).

Tools:
Knitting needles 3 mm circular (40 or 60 cm), stockings.
Knitting needle for braids.

Density:
23 stitches wide and 48 rows high in garter stitch - 10x10 cm.

Garter stitch in rows:
1 rib = 2 rows of knit stitches.

Decrease 1 - for the header:
Knit all decreases on the right sides!
After the marker: 2 knit stitches along with broaching.
Before marker: 2 knit stitches together.

Additions - for mittens:
Add yarn overs and knit a yarn over in the next row with a crossed loop.

A cap
Knitting in straight and reverse rows.
= 114-120 pt (inclusive of edging). Knit 3 ribs in garter stitch.
Next row from right side: 39-42pts in garter stitch, A.1a (= 36sts) and 39-42pts in garter stitch.
When pattern A.1a is knitted vertically once, it will be 119-125 pt.
Next, pattern A.1b (= 41pt) over A.1a.
Continue in this sequence until 21 cm (finish with a whole repeat).
Place 6 markers in garter stitch: knit 3-6pts in garter stitch, RM (place marker), * 12pts in garter stitch, RM *, repeat from *-*2 times only, knit 12pts in garter stitch, knit A.1b, as before, knit 12 stitches in platter stitch, * RM, 12pts in platter stitch *, repeat from *-* only 2 times, RM, knit 3-6 pts in platter stitch (= 6 markers in total).
Then decrease by 1 stitch after the first 3 markers and by 1 stitch before the next 3 markers - SEE DECREASES 1.
Decrease like this in every 4th row only 4-5 times, then knit A.1c over A.1b and continue decreasing near the marker in every 2nd row 6 more times = 25pts.
Knit a row, knitting all loops together in 2 = 13 stitches.
Cut the thread, pull the end through the remaining loops, pull and fasten.
Cap height approx. 26-27 cm.
Sew the hat along the edges.

Mittens
Circular knitting.
Left mitten:
= 44-47pt on double needles. We knit 3 ribs in garter stitch.
Continue with next round: 1st stitch, A.2a (= 24pts) and 19-22pts.
When pattern A.2a is knitted once in height, it will be 49-52 pt.
Continue knitting A.2b over A.2a.
When it is 10 cm, add 4 stitches evenly in garter stitch = 53-56 stitches.
Continue working on the patterns as before.
At a height of 12-13 cm - increase the 1st loop on each side of the first loop at the beginning of the circle for the thumb wedge (see increase at the top).
So add on each side in every 2nd circle only 6-7 times = 65-70pts.
Next around the circle, remove 13-15 loops for the wedge on the secondary needle. Continue knitting in the round, casting on 1 new stitch behind the slipped stitches = 53-56 sts.
At an altitude of approx. 25-27 cm (3 cm remains to the end), make decreases:
On the next row, start working pattern A.2c over A.2b and decrease 3 stitches evenly in garter stitch every 3rd round a total of 6 times = 12-15 stitches.
Next round: knit all stitches together in 2 = 6-8 stitches.
Cut the thread and pull the end through the remaining loops. Pull and secure.
Mitten height approx. 28-30 cm.

Finger:
Remove the 13-15 stitches set aside on the stocking needles and raise another = 16-18 stitches along the edge of the hole. We knit with scarf knitting in a circle up to 6-7 cm, in the next. row knit all loops together 2 - 8-9pt.
Cut the thread, pull the end through the remaining loops, pull and fasten.

Right mitten:
Knit mirror left; work A.3 instead of A.2 and increase finger wedge stitches on each side of the first garter stitch after pattern A.3.

Knitted hat Serpentine

by spider_knit. You can knit a hat of any density, not just from Gazzal Tango, but for this you need to knit a sample; I recommend knitting a sample with 29 loops (27 pattern loops and two edge loops). The sample should include 1x1 elastic with classic loops (it is better to make an Italian set of loops) and two repeats in the height of the main pattern.

The pattern in the carousel is for circular knitting. When knitting in turns, you need to knit the pattern as follows:

Knit the 1st row after the elastic.

Turn the knitting and knit: edge * remove purl thread before work, purl 2, again remove 1 purl. , then knit 5 purl*.

Part 1. Calculations

First, we will take measurements of our sample after the WTO, dry. Separate elastic band: width in cm and number of loops and height in cm and number of loops. We do the same with the main pattern.
I have a 1x1 elastic band: 27p-8.5 cm; 15 rows - 4.5 cm, so in a square 1x1 cm 3.18 loops and 3.33 rows
My head circumference is 55 cm. I will knit the elastic with a turn-up, so I multiply the width of the elastic by 2, i.e. the elastic band will be 6 cm in finished form, which means we knit 12 cm.
Calculation: 55cm (OG) x 3.18 loops (how many loops are 1 cm wide) - 15% for tightness. Love weaker - subtract 10%, love straight reinforced concrete on the heads - subtract 20% (for children it’s important if girls don’t have braids). I got 149 loops. We select a number that is a multiple of 9 and close to 149 - for me this is 144 loops. We calculate the height of the elastic - 12 cm (height) x 3.33 (number of rows in 1 cm) - we get 40 rows and plus a cast-on edge.

Using an Italian cast-on, cast on the number of stitches based on your calculation (I have 144 stitches). Knit the first two rows with a hollow elastic band, then close the knitting in a circle and place a marker for the beginning of the row

Part 2. Header body/all photos in the application

Important .We start knitting the body of the hat from the second row of the pattern and knit “braids” after the 11th row according to the pattern. Having knitted the elastic to the desired height, we need to make increases in the fabric of the hat for a loose fit and switch to knitting needles 0.5 sizes larger, in the sample I am the main one I knitted the pattern with 3.5 knitting needles. Of course, you must calculate your knitting density using the knitted pattern.

My knitting density for the main pattern was 10 cm, 26 loops, i.e. I have 2.6 loops in 1 cm. On an OG of 55 cm, this turns out to be 2.6 x 55 = 143 loops, but your hat will fit directly on your head. This option is suitable if you are knitting a hat for a man, a child, or if you yourself like to wear this style of hat. If you like the fit to be a little loose, then it’s better to add from 5 to 15 percent to the resulting figure (I added 15%, because my knitted hat will have a lining and this needs to be taken into account and I don’t like clingy hats) . That. I got it: 143 + 15% = 164 loops, I rounded to a multiple of 9 (pattern repeat) and got 162 loops. Let me remind you that I have 144 loops on rib knitting needles; to get 162 loops, I need to increase 18 loops.

162 loops are 18 repeats.

That. I need to perform an increase in each rapport.

Rapport with an increase: remove the loop behind the front wall, knit two loops from the front loop, remove the loop behind the front wall, 5 front loops.

If you have difficulty with such an increase in loops, then you can increase through an equal number of loops, but in this case you knit the first row of the pattern and increase in it by knitting two loops from one front one.
Knit the body of the hat to the required height.

Part 3:Calculating the height of the body of the hat

The height of the body of the hat is calculated as follows: the desired height of the hat minus the height of 14 rows (we measure according to the sample).

Decrements are made according to the pattern in odd rows (in which we knit ALL the loops and overlap the braids). Deductions are made in EVERY rapport. The place of decrease in rapport is indicated in the diagram (the diagram shows ONLY ODD ROWS WITH DECREASES, even rows are knitted according to the pattern), the diagram is in the appendix. In the diagram, three ticks are our braids. The third is the first braid of the next rapport

Decrease is ALWAYS performed before overlapping the braid as follows: Knit stitch, leave one loop in front of the braid unknitted, transfer it to the right knitting needle, remove the braid loop onto an additional loop BEFORE work, transfer the next loop after the braid loop to the right knitting needle without knitting, do not knit the braid loop When knitting on the left knitting needle, we transfer two unknitted loops from the right knitting needle to the left knitting needle, knit them together, then knit a braid loop.

Photo of the process of decreases in the carousel (photo 3,4,5)

In this way, you decrease 6 times (see the row diagram), only the braid loops remain on the knitting needles.

In the 7th row, knit two loops together, in the next row close the loops with a needle and tighten well so that a hole does not form.

If you cannot tighten the loops well, you can re-thread the needle and sew the loops of the crown, then tighten.
serpentine hat ready. All you have to do is complete the OBE and wear it with pleasure.

A hat with a simple pattern in 2 hours

Description of the blue and gray hat with photo.

These hats can be knitted from any yarn of sufficient thickness (100 m x 100 g is ideal. I love the 100% popsicle wool from Drops and 100% Perun alpaca in these hats.

Take knitting needles No. 6-7 for this yarn, circular, straight - it’s an individual matter. You can even knit in turning rows and then sew. I knit on short circular needles or on long line circular needles using the magicloop method. And you need to knit a sample! The density of this pattern is 16 loops in 10 cm. Author: Tatiana MK @tanya_svazala

Knitting pattern in the round:
1st row: *3 purl loops, 1 knit loop (Do not remove the loop, thread at work)*, repeat from * to * until the end of the row.
2nd row: *P3, k1*, repeat from * to * until the end of the row.

For turning knitting, edge loops are not included in the number of loops!:
1st row: *3 purl loops, 1 knit loop (remove the loop without knitting, thread at work)*, repeat from * to * until the end of the row.
2nd row: *P1 3 persons.p.*
Pattern repeat 4 loops x 2 rows

We cast on 64 loops on the knitting needles (I have size 6). With a different density, the quantity will change accordingly, but it should be a multiple of 4. We knit with a simple 1x1 elastic band about 9 cm.
Then we move on to the main pattern (I do not change the needles, the number of loops also does not change) and knit another 13-14 cm.

Decreases

Decreases should begin in an odd row: 1st row of decreases: * 1 purl stitch, 2 purl stitches together, 1 knit stitch dropped * repeat from * to * until the end of the row
2nd row of decreases: *P2, knit 1*, repeat from * to * until the end of the row.
3rd row of decreases: * 2 purl stitches, 1 knit stitch * repeat from * to * to the end of the row
We knit the 4th and 6th row of decreases as the 2nd row of decreases
We knit the 5th row of decreases as the 3rd row of decreases
7th row of decreases: *2 purl stitches together, 1 knit stitch dropped* repeat from * to * to the end of the row.
8th row of decreases: * purl 1, knit 1 * repeat from * to * to the end of the row
9th row of decreases *1 purl, 1 knit stitch* repeat from * to * to the end of the row.

Beanie Mercado by Cheryl Toy

Sizes: S (M, L)

Circumference - 39.5 (44.5, 49.5) cm,
Height - 25 (25.5, 26.5) cm.

Berroco Quechua yarn (60% wool; 20% baby alpaca, 20% yak wool; 150 m / 50 grams per skein) - 2 skeins.

Required tools:
Circular needles No. 2.75, 40 cm long, set of 5 double-pointed needles No. 2.75, extra needle, 8 stitch markers, 1 distinctive stitch marker to mark the beginning of a row.

Knitting density:
32 loops and 40 rows = 10 cm of stockinette stitch after steaming;
27 panel loops with strands = 6.5 cm wide after steaming.

Knits used
Twisted elastic band (even number of loops):
1st round row: *1 purl loop, 1 knit loop behind the back wall; repeat from * to the end of the row.
For rapport, repeat row 1.
Panel with harnesses:
Knit according to the pattern

Notes:
The hat is knitted in circular rows from bottom to top.
The hem inside the panel with strands is achieved by making yarn overs immediately after the cast-on row and then, before finishing, lowering the central purl loop of the pattern to the yarn over on the rim of the hat.

Start knitting

Headband:
Cast on 156 (172, 188) stitches using a German twisted cast-on
Place a marker and join the stitches in a circular row.
Installation circular row: *1 purl loop, - 6 times, knit 2 loops together, 1 yarn over, knit 2 loops together, - 6 times, place a marker; repeat from * 3 more times - there are 152 (168, 184) loops on the needles.
Tie 3 cm with a twisted elastic band.

Main part:
Installation round row: [knit stitches to marker, marker, 1st row of harness panel to marker, marker] - 4 times.
Continue knitting in the established order, knitting the panel with strands between the markers, and all other loops in stockinette stitch, until the knitting height reaches 15.5 cm, ending with the 8th row of the panel.

Top of the header:
Note: if necessary, switch to double-pointed needles.

1st circular row of decreases: - 4 times - 144 (160, 176) loops on the knitting needles.

Knit 1 row straight.

2nd round of decreases: [knit stitches to marker, marker; Purl 2 loops, purl 2 loops together, panel with strands, purl 2 loops together behind the back walls, purl 2 loops, marker] - 4 times - 136 (152, 168) stitches on knitting needles.

Knit 1 row straight.

There are 128 (144, 160) stitches on the needles.

3rd round decrease row: [knit stitches to marker, marker; 1 purl loop, 2 purl loops knit together, panel with strands, 2 purl loops knit together behind the back walls, 1 purl loop, marker] - 4 times - 120 (136, 152) loops on the knitting needles.

Repeat the 1st round of decreases. Knit 1 row straight.

There are 112 (128, 144) stitches on the needles.

4th round of decreases: [knit stitches to marker, marker; Knit 2 loops together purlwise, panel with strands, 2 loops knit together purlwise behind the back walls, marker] - 4 times - on the knitting needles 104 (120, 136) loops.

Only for sizes M (L):

[Repeat 1st round of decreases. Knit 1 row straight] - 2 (4) times - there are 104 loops on the knitting needles.

For all sizes:

5th circular row of decreases: - 4 times - 96 loops on the knitting needles.

Work 1 row straight, knitting 1 stitch behind the back wall above the decreases in the previous row.

6th circular row of decreases: - 4 times - 88 loops on the knitting needles.

Work 1 row straight by knitting (1 knit stitch, 1 purl stitch, 1 knit stitch) in the first section of each repeat and knit 1 stitch behind the back edges over the decreases in the previous row.

Repeat the last 2 rows two more times, then repeat the 6th row of decreases - there are 64 loops on the needles.

Circular row of dropped stitches: *1 knit stitch, 1 purl loop, 1 knit stitch, marker; - 3 times, 1 yarn over, lower the next loop and unravel it down to the rim, - 3 times, marker; repeat from * 3 more times.

[Knit the 6th row of decreases, knit the 1st row straight] - 3 times - 40 loops on the knitting needles.

7th circular row of decreases: - 4 times, removing markers - 32 loops on the needles.

Last round row: *1 knit stitch behind the back wall, 1 purl loop, - 2 times; repeat from * throughout the row.

Cut the thread, gather the remaining loops with the end of the thread, pull tightly and secure the thread.

Thread the ends of the threads. Steam the hat.