To decorate a room or the facade of a building, a tree or an arch, it is best to make them yourself. Master classes for making such jewelry are presented here to users.
Volumetric large flowers made of paper using a stapler
You can make such decorations very quickly. To make them you will need thick colored paper. You can use whatman paper, pre-painted with paints, or colored cardboard for children's creativity. To make large paper flowers more vibrant, it is recommended not to make the craft monochromatic. Let each petal be red, yellow, blue, and orange at once.
- First, cut out the lower petals, the largest ones.
- Then three others are prepared, from other flowers and smaller ones.
- The parts are stacked as the size decreases, with the smallest one on top.
- In order for such large paper flowers to gain volume, the bottom of the entire stack of petals is folded into a boat and secured with a stapler.
- Four more details are made in the same way. In total, to make a large paper flower, you will need five such voluminous petals.
- Each part is again stapled at the bottom, capturing the side of the adjacent petal.
Such large paper flowers look beautiful and bright. They are used to create arches.
without cutting out petals
You can make a large flower out of paper using the method of making ordinary small blossoming buds. That is, the master folds the material around the stem like an accordion and clamps the strip at the bottom, straightening the upper part of the product.
To make these voluminous large paper flowers more vibrant, several shades should be used when making one craft. You can even combine blue and red material, purple and pink, orange and burgundy.
- A piece of fleecy is placed in the center of the flower. Bright beads are attached to its ends. The middle of a piece of chenille is wrapped around the stem - thick wire or a wooden skewer. These will be the stamens.
- Now the first layer of paper is laid out around the stamens with a skirt. You can fix the workpiece by wrapping the bottom with threads or soft wire.
- The second layer of paper is laid in the same way, only the upper edge of the strip needs to be slightly stretched along the corrugation. This will create a pompous effect.
- The same is done with the third row.
- At the very end of the work, use a row of green paper. You just need to take a very narrow strip - these will be the sepals.
Aster, cornflower, carnation
The method described above is an example of making a fantasy flower. However, asters, carnations, and cornflowers do almost the same thing. The difference is that before work, a strip of corrugated paper needs to be prepared.
You should make one of its edges jagged, using special scissors or cutting out triangles by hand. You can make transverse cuts on the strip to the middle.
Flower bow
You can use stylized imitation flowers for decoration. Such a large paper flower is made from loops made from colored stripes.
The petal folds quite simply. A section of a wide strip is folded in half across, but the fold does not need to be ironed. Isn't it true, the petal resembles half
Both ends of the strip end up in the same place. They are compressed and placed around the stem. Having collected the required number of petals, the master secures them at the bottom with threads or wire.
The sepals are made in the same way as in the variant described above.
Paper dahlia
Using the algorithm for making a bow flower, you can build an imitation of a dahlia. To do this, at the moment of folding across the paper strips, longitudinal cuts are made at the bottom. They should be equal to about three quarters of the length of the folded loop and not reach the cut so that the petal does not fall apart. The rest of the work is performed according to the scheme described in the previous section.
Corrugated paper rose
The beauty rose has always been considered the queen of the flower garden. This is one of the most difficult crafts to do. In order to make paper flowers (large or small - it doesn’t matter) that resemble a rose, you will need to cut out each petal and work on it.
- So, prepare the required number of parts in the shape of a heart with a slightly smoothed top - do not sharpen it, let it be better to have a concave arc.
- Each petal should be stretched slightly in the middle, giving it a convex shape.
- The upper parts protruding above the concave arc are wound around the pencil and twisted.
- The inner bud of roses is usually not open. Therefore, it is better to twist the first petals inward. By folding them with your palms, you can get an unopened inner bud. It is recommended to lay a couple more petals in the same way.
- The next row is made of parts twisted outward. To make a large voluminous paper flower look as much like a real one as possible, you will need quite a lot of these petals. The more there are, the more magnificent and attractive the rose will be.
- The flower has sepals at the bottom. Wrap the stem with green tape. In the absence of such, a roll of green corrugated paper can be cut across so that you get a thin roll about a centimeter wide. Having glued its end to the stem under the flower, the craft itself is taken in the left hand and lightly twisted clockwise. With your right hand, press and lightly stretch a strip of green paper. Each turn goes down the spiral a little. Thus, the entire stem is wrapped.
- You can insert a green leaf during wrapping - this will give the rose a greater resemblance to a real living flower.
Rose "waste-free"
You can simplify the work of making a queen of flowers. This method eliminates the need to cut out each petal separately. It is enough just to make transverse notches equal to the width of the petal on a wide strip of corrugated paper. Each right corner of a strip rectangle is wound onto a pencil in a known manner. The first four petals rotate inward, the rest - outward.
Then you should stretch the petals in the middle - each one separately. Place the whole thing on the prepared strip around the stem, straightening the petals and squeezing the strip from below like an accordion, giving the product the required volume.
Further design of the craft is carried out in accordance with the algorithm described above.
Pleated petal poppy
This flower is quite easy to make. To make it, you need to cut out petals shaped like drops from fairly thick colored paper. You only need eight of these parts. The petals are folded lengthwise like an accordion, then straightened.
The blanks are glued onto a small green circle - a sepal, slightly gathering the lower part so that they rise above the plane. The first row consists of five parts, and the second - of three. Moreover, the inner layer should rise above the outer one.
For the center of the flower you will need to cut out two circles: the yellow one should be slightly larger than the black one. Many cuts are made around the circumference of the yellow parts to create centimeter-wide stamens. They are curled with scissors (ironing with force) or a pencil. The middle is glued alternately: first the yellow part, and the black one on top.
Briefly about the main thing
In order for the flowers to turn out beautiful and lush, the artist will need accuracy and desire. Bright materials will also do the trick. And the master classes published here will help beginners complete the presented models.
How often do we want to please our eyes with flowers! It is not always possible to buy a fresh bouquet, and indoor plants do not bloom all the time. I propose to consider an excellent option for decorating the interior using paper flowers. You can make paper crafts yourself and decorate your favorite corner with them, as well as present the fruit of your efforts as a gift.
What you need to make a bouquet of paper flowers
It all depends on the option you want to make. In some cases, you only need paper and a stationery knife (scissors). And sometimes the number of items in the list of materials will be significantly larger.
Let's look at everything. what is usually needed for production.
Art salons and shops offer a huge selection of materials for creative people. You can also find specialized tools. But they are not cheap. If you are going to try yourself as a master of applied arts for the first time, you can completely do without extra costs.
The best ideas for DIY paper flowers
I love making compositions and giving them to friends or relatives. I use different techniques. I will briefly describe some of them.
Modular origami
Currently, flowers created from many individual elements, that is, modules, are very popular. Both adults and diligent elementary school students will be able to perform such work.
Modules - These are small sheets folded in a certain way. There are ready-made kits on sale, but you can make the blanks yourself. An A4 sheet is divided into equal parts, 16 or 32. The parts of the product are assembled together without the use of glue. The parts are simply inserted into each other.
I prefer small triangles. The works come out small in size and look neat.
An interesting way to process paper - twisting . Thin long strips are used. You can cut out the parts for work yourself from an ordinary thin sheet of a suitable color.
This type of handmade art is suitable for use both on a plane: for cards or decorative panels, and in voluminous bouquets. If you try, you can create a wonderful miniature. The main thing is to start with simple options .
Corrugated cardboard is suitable for working together with a child. You can find packages of ready-made paper ribbons in office supply stores.
Application
It all depends on your imagination.
- Paper spiral flowers
You will need paper, pencil, scissors and PVA glue.
I experimented with thick and thin paper, as well as cardboard. The appearance of the roses is different. And each one is very easy to do.
On the square we draw a spiral, which we then completely cut out. The workpiece is gradually twisted: from the outer part to the inner circle. The top edge can be bent slightly. Visually you will get petals. The central circle of our curl becomes the base of the flower (we glue it to the bottom of the bud and fix the size). In my opinion, such roses will look better on a decorative panel than in a bouquet.
- From wide stripes of color
Here the material will be paper, glue, scissors and a stem of your choice.
We divide the standard sheet into 4 long strips. Fold each strip 4 times. We cut on one side. The width of the petals should be small for greater naturalness. This method can be used to make chrysanthemums and dandelions.
- Compositions from waste material
You will need several tubes of paper towels or toilet paper, paint (preferably gouache), a brush, scissors, glue, a juice tube, a corrugated sheet, and a stapler.
Tulips will turn out great. I used soft tube (paper that melts in water) for my spring flowers. I simply cut the cylinder horizontally into 2 parts. Half - 1 bud.
I drew the outline of the petals on the form and cut them at the top and bottom. I cut it completely in one place, treated it with paint and twisted it so that the fourth petal was inside. I used a stapler to fasten the bottom of each leaf. All that remains is to insert the stem and secure it.
- From individual petals (according to a template)
: soft colored sheets (for example, corrugated paper, tracing paper, napkins). You will also need scissors, glue, thin twigs, wire or drinking straws.
We make several layers of future petals using a template. Glue the central part of the inflorescence onto the branch. Then we begin the gradual formation of the bud. Your masterpiece will look more interesting if the middle differs in brightness from the petals.
- Corrugated paper roses
For such work, you need to take special paper, threads, glue and a basket or other container in which the bouquet will be placed.
For one flower you will need : 1 sheet of corrugated paper, about half A4 size (approximately 10 cm x 29 cm).
I twist the workpiece into a tube along the long side. After this I form the rose. I secure the base inconspicuously with thread. I attach it to the stem. The stem of the flower can be a twig wrapped in green paper.
Personal master class on making paper flowers for beginners
"Bouquet in a vase"
- pink and light green printer paper;
- scissors;
- wire;
- sewing needle;
- glue stick;
- vase.
Stages of making a flower arrangement
STAGE 1
We will need paper squares of various sizes. To collect one flower you need to prepare 6 leaves. The largest is 10x10 cm, then you can reduce it by 0.5-1 cm each subsequent one. The middle in my case is 3 cm in diameter (if we consider the flower itself).
STEP 1 Cut out paper squares
STAGE 2
Fold each square to form a triangle and carefully cut out with scissors. Don't be discouraged if it doesn't turn out perfect. This will only add naturalness to your product.
STEP 2 Make triangles from squares
STEP 3
Let's prepare the layers of the future flower.
To do this, you will need to curl each petal a little using a scissor blade. Moreover, the largest bottom sheets curl in two different directions. The tips of the petals are up, and the middle is the opposite. This is done to achieve greater volume.
STEP 3 Bend the petals
STEP 4
We lay out our layers in sequence.
We adjust the flowers to size. You may feel like you need to make a section smaller or curl a certain element more.
STEP 4 Collect layers of petals
STEP 5
We collect a flower.
To do this, put one layer on top of the other: from larger to smaller bud. For ease of subsequent connection, I use a needle. I pierce all the blanks and thread the wire into the hole, as if I were starting to sew a button. There is a small stripe on the front part.
STEP 5 Prick the middle of the flower with wire
STEP 6
Making a stem for a flower. The wire (which connects the leaves) is wrapped with a thin strip of green paper. The sharp end of the metal can be bent and hidden inside the greenery.
STEP 6 Wind colored paper onto a wire
7 STEP
We make leaves.
I cut out the leaves without preliminary drawing. I take a wide strip of paper and fold it several times. I bend it in half along a long line and cut it into shape.
STEP 7 Cut out the leaves
8 STEP
Glue the leaves to the stem.
Everyone can choose the height and size of the leaf according to their taste. It seemed to me that they should be higher towards the bud.
Summary: DIY flowers made from paper. How to make flowers out of paper. Flower made of corrugated paper. Paper flower master class. Volumetric paper flower. Flowers scheme. DIY gift for mom.
March 8 - "International Women's Day", a holiday of Spring and Love. On this day you can’t do without a bouquet of flowers for your beloved women: wives, mothers, grandmothers, daughters! And if these flowers are made with your own hands, then they are doubly pleasant both to give and to receive! In this section we have collected for you a large number of master classes on making flowers from paper with your own hands.
1. Paper flowers. Paper flower
Origami tulip
With older children, you can make a more complex version of a paper tulip. For a master class on making a tulip using the origami technique, see the link >>>>
And here is another very beautiful paper tulip. You can download ready-made templates for making this paper craft, and follow this link to read the instructions.
Paper flowers. DIY gift for mom Another spring paper flower is offered to you by the Krokotak.com website. Read detailed instructions on how to make hyacinth from paper.
You can make a beautiful origami paper flower as a gift for your mother or grandmother with your own hands. For instructions on how to make such a flower out of paper, read the link.
How to make flowers out of paper
The stems of paper flowers can be made from plastic tubes. Multi-layered flowers cut out of colored paper of different colors look beautiful, as in the photo below. Flower stand - half a cardboard chicken egg tray, painted green.
How to cut flowers from paper. To cut a flower out of paper, use the diagram shown in the photo below.
How to make a paper flower
To make a festive bouquet of paper flowers as a gift for your mother for her birthday or March 8th, look at the instructions on this website.
2. Paper flowers master class
3. Volumetric paper flowers. Volumetric paper flower
In general, cardboard egg cartons are a very suitable material for making flowers yourself. For detailed instructions, see the link >>>> To decorate homemade flowers, the author of the craft used buttons. Flower stems made from the so-called look impressive. chenille (fluffy) wire.
Flowers can be made from plain or corrugated paper. Attach them to the branches using tape, a glue gun or thread.
You can also decorate tree branches (with or without green leaves) with small paper roses. Making these roses is very simple. A spiral is cut out of double-sided colored paper, which is then twisted from the outer end into a multilayer cone. You can twist the spiral onto a toothpick. For detailed instructions, see the link >>>> If you want to make such flowers for your mother by March 8, then cut a few tree branches in advance and place them in water at home. When green leaves bloom on them, decorate them with paper roses.
5. Paper flowers master class. Circle flowers
This flowering twig is made using mixed media. Petals and leaves - using the origami technique of circles. Twisting and rolling techniques are also used. For a detailed master class of paper flowers, see the website
Good afternoon, today I’m finally uploading a large selection of master classes on the theme of paper flowers. Here are the most interesting ways to make paper flowers. We will make a variety of flowers - flat and three-dimensional - from corrugated paper and thick colored paper. I will show you every craft step by step in photos and I will give as much as possible detailed instructions to each flower made in one way or another. I will also give stencils– templates of flower silhouettes. All the crafts I collected are posted in order from simple to complex. First of all, we will study the MOST UNDERSTANDABLE techniques for folding paper flowers (those that are easy to understand and repeat ourselves)... and gradually move on to MORE COMPLEX and painstaking instructions (to prefabricated detailed flowers and the origami technique). I also uploaded a special article dedicated to different ways to make a paper rose - here is the link to it
And, for educators (teachers and educators) I made an article with simple children's crafts WITH FLOWERS, which can be made in classes at school and kindergarten from paper and other materials:
I specifically decided to do so big a selection of paper flowers in one place - with the goal that you can immediately find a suitable scheme for assembling a flower for THAT PAPER THAT YOU HAVE, and for the task that you want to solve with the help of paper flowers (a flower craft as a gift for mom, decorating a child's birthdays with voluminous flower arrangements, wedding decoration, decor for cards or gift bags).
The only thing I didn’t include in the body of this article was PAPER ROSES. I found ways to make a voluminous rose so much that I had to put these crafts in a separate article on the same site, it will be called that “Paper roses - 20 ways to make them yourself.”
But before we begin the master classes themselves, I want to make you fall in love with the very idea of paper flowers. I want even casual visitors to this web page to have their hands itch and their eyes to light up. And I want to awaken in you delight and a burning desire to make a flower with your own hands. So that this magic arises... so that your soul also spreads its petals and blooms...
Let's see what piece of life a flower you made can decorate. Here are examples of how an ordinary table setting can become very beautiful and formal with lush floral crafts.
Also, large paper flowers made of crepe or corrugated paper are used for decorative purposes. for celebration decoration– wedding hall, children's birthday party, incendiary party. They are mounted on the wall or on the backs of chairs, or tied to window handles.
But such large flowers can be made from A4 paper (office size) or from a roll of corrugated crepe paper.
Photographers and photo studios also use voluminous large paper flowers as exclusive props for staged photographs.
You can also make such a large paper flower simply as a gift for Mother’s Day, or for March 8th. Surely no one has ever given your mother something like this before. Will be remembered for a long time. And you can also take a picture of your mother right away with this flower - she will proudly post this photo on her social media page.
Ordinary plastic combs, rims and metal pins can also be decorated with voluminous paper flowers. So we will get elegant hair decorations for a wedding or party.
Miniature paper flowers can decorate handmade cards, and other scrapbooking crafts (like these delicate crepe paper pansies).
Also, a paper flower made with your own hands is the best gift box decoration. And not costly. A lush gift ribbon costs much more than a couple of sheets of colored or white office paper - a few movements with scissors and now a paper orchid or the delicate pink color of a wild rose has bloomed on your package.
And the flowers themselves can be a great stand-alone gift. If you arrange your work in the form of a basket, or a decorative panel (as in the photo with poppies made of colored paper).
If you learn how to make paper flowers with your own hands, you can use this talent in many areas of life. It will be simple and easy for you to decorate a room for any holiday, decorate a family celebration at home, or beautifully decorate gifts for relatives and friends, or entertain the neighborhood kids by organizing an interesting craft with a master class.
METHOD No. 1
PAPER FLOWERS
I decided to call the flowers made this way "puff pastries" because their construction principle is the same as that of puff pastry. Subtle layers of floral silhouettes overlap each other. And each layer is given convex volume(or faceted relief), and due to this the flower looks lush and voluminous.
Here in the photo below we see a step-by-step master class for beginners on how to create such a voluminous dahlia flower. The dahlia is not to be confused with the aster; the aster has narrower petals and each has an edge (a raised fold like on trousers).
So... let's look carefully at the photo of the flower craft below. The trick here is that paper is cut layer outlines– each contour has six petals, and differs from its counterparts only in size. That is, the shape of the stencil is the same - only the size is different.
Before gluing each cut paper arch the silhouette in order to give it a natural shape. We begin gluing and assembling the paper dahlia from the little ones middle layers to larger and larger ones.
Of course you have a QUESTION:“And how to cut such uniformly sized petal circles-layers.
ANSWER: Here's the one simple and fast way make such a flower with your own hands as a novice master. It does not require searching for a stencil template, but allows you to obtain geometrically even petal parts for a paper flower without any measuring instruments (compasses and rulers).
- Take a sheet of paper and glasses different radii. We trace them on a sheet of paper.
- We cut out the resulting rounds, fold each round in four and in half again (as when cutting out a snowflake). And on such a round piece folded into a triangle we draw outlines of two petals (like a heart).
- We cut this contour with scissors (see photo below) - we deepen the cutout in the middle of the heart - we unfold it and get a petal layer.
Because we have circles of different sizes - then we will get petal layers different in size. We set the relief, put it together, add a yellow stamen-middle (stamens will be discussed below).
Such a delicate flower can be strung on a wire (to make a stem) and presented to your mother as a paper bouquet for Mother’s Day.
ANSWER: An ordinary round stick (pencil or pen, or knitting needle) can serve as a stamp for imprinting relief on the petals. Here's how you can do it yourself, you can clearly see in the photo of a flower craft below.
The flower assembly diagram is the same as the previous one (see step-by-step photos).
Using the PAPER PAY technique you can make a variety of three-dimensional flowers (anemones, poppies, asters, dahlias, roses). The evidence is in the photo below.
You see – the same “puff” method – but the results are completely different flowers. And all due to the fact that the silhouettes of the paper petal layers are DIFFERENT IN THEIR OUTLINES.
And don’t forget that not only the contour (silhouette, shape of the petal) is important... but the RELIEF of the petals is also important. It is the correctly defined relief that transforms flat outlines into living convex layers of the future flower.
For relief we need round sticks of varying thickness (thin knitting needles, toothpicks, thick round-sided markers, felt-tip pens, spherical perfume caps, or lollipops). Any items that will help set the shape.
So that the relief lies neatly on thick paper– you may need to slightly moisten it before work (sprinkle it from a spray bottle or hold it on a wet towel). Try it and see how it works better - dry or wet.
And here's to you ready-made templates puff paper flower. Flower stencils are already several sizes. You can right now put a sheet of paper on the glowing screen and trace with a pencil these silhouettes shining through from the screen onto your sheet of paper (this is my favorite way copy the template without any printer - not every home has a printing device).
And you can also resize any template using a computer mouse.
Look - in the photo below I give you a template silhouette. Silhouette is ONE size only. Do you want to get this silhouette? different sizes– to make a multi-layer paper flower craft.
To change the size of this silhouette, you press on the keyboard with one hand buttonCtrl, and while holding this button pressed, use your other hand to turn the mouse wheel - back and forth. And from this action of yours, everything that is now drawn on your screen increases or decreases, depending on where you turn the wheel - away from you or towards you.
Try this right now– press and twist. See how the stencil design image below has changed size? This way you can directly on the computer screen, adjust the template to any size and trace it with a pencil on a sheet of paper placed on the screen of your monitor. This is the fastest way to get the outline of any flower stencil immediately in any size we need.
Here are shaped templates for future paper flowers - and you can change the size of the picture yourself. And you can design and create any paper flower with your own hands. 
Let’s also take a closer look at the interesting additions to such layered colors.
How to make a stamen
in puff paper flowers.
Below is an interesting step-by-step lesson where we see how a stamen for a multi-layer paper flower is created step by step.
How to apply
large inflorescence
on one stalk.
And I would also like to show another one here clever and simple trick which allows you to do whole inflorescence of flowers on one stem. In nature, flowers are often found where many flower cups nest in one place and have common central stem.
This is exactly the kind of flower craft that the step-by-step master class in the photo below will demonstrate.
- We cut out a bunch of stems with a common round base from green thick paper (or cardboard). We glue double-sided tape onto this round base.
- We twist a tube from a newspaper and wrap it in green paper. Glue the tube-stem to the round base - twisting it around the stem.
- We make flowers (from two red layers and one black stamen). We glue each flower onto its stem. We add wide leaves to the central stem-leg. It turns out to be a very beautiful stem-bouquet made of paper.
How to make a layer flower
WITH ASSYMETRICAL petals.
But in the photo below we see from what shape the layers are used to create an ORCHID paper flower with your own hands.
In a glass of water add a drop of green paint– we get light green water. We wet the white parts of the orchid with this water; they become white-green (just like in nature).
Further while the pale green petals are still wet, we apply lines of purple paint on them - on wet paper the lines themselves blur slightly - we get an uneven, blurry color (exactly like a real orchid).
The middle part of the orchid - upper layer We also make it green... and along the very edge (right along the cut of the paper) we paint it bright purple. Thus, when we lift this top layer up, the purple edges stick out with their color upward, imitating the position and color of the furry central petals of an orchid.
The same principle is used to create various asymmetrical flowers-crafts. Let's remember what other flowers do not have circular symmetry in their cup... that's right, these are PANSIES (photo below).
- Lower layer of blue petals (total 2 pieces with location in the upper direction).
- After blue layer petals (also 2 pieces spread out to the sides).
- And the third top layer in the form just one white petal.
- Then we smear the central part of the flower with yellow color, and draw the central lines with a pencil. We make yellow stamen balls from crumpled paper (or from plasticine).
A simple DIY craft that even a child can do. The main thing is to prepare templates in advance that the child will trace on colored paper.
Volumetric puff flower
made of THIN paper.
We do such techniques as “different layer sizes” and “work on folding the relief on paper petals” only when we use ordinary THICK COLORED PAPER
But if If you make flower crafts from CREPE, CRUMPTED PAPER, then you don’t need to specify the relief there. The texture of the paper itself will allow you to make a fluffy three-dimensional flower.
Moreover, The corrugated structure of the paper allows you not to even bother with getting LAYERS OF DIFFERENT SIZES. That is all layers of the flower can be the same size. The master classes on paper flowers below clearly prove this.
Do you see? All layers of the flower are the same size. We pierce the middle of the layers folded in half with a hole punch (or a needle and thread, or fasten with a stapler). Unfold the flower and fluff its layers into a fluffy pompom. These are very beautiful large paper flowers.
This is perhaps the easiest and lightning fast way to make a flower with your own hands. It turns out big, lush, rich and expressive.
If we choose napkins of two colors and apply them alternating colors, we will get a play of halftones in each layer, and our flower will look like a rose.
You see, in the method below we make identical silhouettes from napkins of two colors (in shape and size like twin brothers). Under the bottom we place a piece of cardboard with two holes (like a button... however, the cardboard can be replaced with a button). And we thread threads into the holes and pierce through all the layers of the napkin. We tie a knot in the middle of the flower and fluff out all the corrugated layers of the craft with our hands.
Think for yourself how you can diversify and complement this airy napkin flower. You can also add border color– to do this, slightly stain the cut out napkin silhouettes along the edges with an office marker.
Turn on your imagination... and let her play around with napkins to her heart's content. There is never a shortage of tea napkins. And suddenly you will give birth to your own designer flower.
And red carnations are made using the same method. Identical round pieces with a jagged edge are also cut out of a napkin - and deep cuts are made into the petal parts. And then they simply overlap each other with a drop of glue in the center... or instead of glue in the center, we pierce them with a stick (there will be a stem on it. A beautiful DIY flower craft for dad on February 23, or on Victory Day for grandpa.
And Lingeri terry daffodils are made using exactly the same principle as carnations (in the step-by-step lesson above). This is what they are like in nature – lush and voluminous.
Spring flowers made of paper are a good gift for mom on March 8th. And now you will find out how easy it is to make them yourself.
And here's how to make them from dyed paper napkins. We place a stack of napkins on top of each other - fold them into quarters - into a triangle - cut the edges with a jagged semicircle. We paint the top napkins in a bright yellow color, and the middle layers of napkins in a light yellow color, leaving the bottom layer white.
Now about the material. Daffodils are gorgeous, you say, but where can you get these paper colors (pale yellow and bright yellow)? Here, I tell you, there are 2 ways at once - 1) dye white paper napkins 2 shades of yellow... or 2) get a pale shade of yellow from bright yellow crepe crepe paper.
INSTRUCTION No. 1. How to dye a white paper napkin.
ANSWER: We paint the napkin in a straightened form with tinted water. Dye some water in a glass and pour it onto a straightened napkin. We wait for the napkin to dry naturally (about a day).
INSTRUCTION No. 2. How to make light yellow from bright yellow crepe paper.
ANSWER: Take yellow crepe paper - put it on a wet towel - put a dry white napkin on top. We iron it with an iron - the bright crepe paper gives up its moisture to the dry napkin, and along with the moisture it partially gives off its color. And we already get PALE YELLOW crepe paper. This way we can change the shades of crepe corrugated paper.
As you can see, everything is solvable - if you turn on your head and think... and try to experiment. Knowledge often comes through experience (even if this path is messy). One bad experience can give rise to several ideas at once. I somehow wet the crepe paper and ruined the craft, but I saw that when it gets wet, the crepe paper loses its color. And one day I spilled water for washing brushes on a paper napkin - and it turned a delicate, even color. So out of two jambs - I got 2 experiences in changing color for delicate and thin paper textures.
Well, this was all just about the FIRST METHOD of making paper flowers with your own hands. I deliberately made this first chapter of our article so extensive and detailed so that you immediately understand a simple and important truth:
Even one single design can have MULTIPLE CONTINUATIONS... numerous variations... endless designs. And you yourself can become the author - and create your own paper flower, made in the same way of “shaped layers superimposed on each other” ».
Now let's look at the next way to make flowers from colored paper with your own hands.
METHOD No. 2
Paper flowers
TWISTED INTO A TUBE.
We have been familiar with this method of creating flowers since childhood. We all made classic flower crafts at school or kindergarten. for February 23 - red carnations made of crumpled crepe paper. They twisted a strip of paper around a toothpick, wrapped a piece of green paper around the twist, and fluffed a bunch of flower panicles.
And it never occurred to us that inside this primitive method there was hidden a recipe for more than just the humble clove.
This method " twisting crepe paper into a roll" can give birth to completely different three-dimensional and flat flowers. It all depends on how we changed the SHAPE OF THE EDGE OF THE PAPER STRIP. Depending on its pattern, we will get paper flowers that are completely different in design.
Here's photo proof. Do you see?
Different regions produce different flowers– disheveled aster, neat chamomile, chrysanthemums. Even roses can be made in this way (but roses will be discussed in a separate article - in detail and in detail, as befits the queen of flowers).
And not only from soft corrugated (crepe) paper you can make craft flowers using this ROLL technique.
Here you go in the photo below - an example of paper flowers in the same roll rolling technique FROM REGULAR THICK COLORED PAPER (office double-sided colored paper).
This is a simple job and very simple instructions.
- A narrow strip of paper was wound onto a thin rod (or toothpick) (to form the center of the flower).
- And then to this rolled center they added a winding of a wider tape, already cut along the edge into petal strips.
- And the petals are folded to the side - like a spreading umbrella.
AND IF YOU ADD A THRUST FOR EXPERIMENT TO THIS SIMPLE TWISTING TECHNIQUE, YOU CAN GET NEW DESIGNS OF PAPER FLOWERS.
For example, what if... You can’t just bend these petals to the sides with a flat, spreading daisy, but slightly twist the tip of each petal inward (as we do with curls in the morning) - and you’ll get a voluminous, lush ASTER.
What if... make a strip for twisting with AREAS OF DIFFERENT WIDTH. We see the result of this idea in the photo diagram below.
- A narrow strip (1 cm wide) for the middle stamen (wrap it in a tight roll on a toothpick).
- Next, we wrap a petal strip (with a fringed edge) 2 centimeters wide onto this roll.
- And then we wind a petal strip 2.5 cm wide...
- and then a petal strip 3 cm wide.
And thanks to the different widths of the stripes, we will get a roll flower in which the height of the petals increases from the center to the edges.
As you can see, you can and should do EXPERIMENTS with this simple roll technique. Let's continue to encourage our inquisitive mind and decide on another wild idea...
WHAT IF, cut the fringe not straight, but diagonally. And what if... this oblique fringe is not cut along the edge CUT, and along the edge of the FOLD (that is, bend the strip in half along the entire length, and cut this fold line diagonally into a fringe, and then twist it in this form.
We see the result in the photo below - an amazing aster with spirally twisting carved perforated petals. A beautiful flower craft - it looks like a difficult job, but making it with your own hands is simple and quick.
Such shaggy flowers with slanting petals can be used as a shaggy stamen for other flowers.
Like for example in this master class in the photo below. Do you see?
There, too, a bent strip is cut along the OBLIQUE FRINGE... and an orange shaggy stamen is formed - needed to decorate the center of the paper aster.
By the way, the paper aster itself from the photo below is made in a very original and simple way.
- The base of the aster is a puff (multi-rayed star with chopped rays).
- Each ray in the puff is bent with a slate ruler into a sharp arrow (like on trousers).
- The layers are superimposed on each other - we get a lush flower.
And just the stamen inside this voluminous flower is made using the OBLIQUE FRINGE technique, which we just talked about.
This roll equipment can be combine with a regular petal puff (Method No. 1 from this article).. Yes – you can – because it occurs in nature. God himself once came to this idea - and created the Marigold flowers. And we will implement this method of combining a roll and a puff on paper. (see how this is done in the infographic below).
In roll technology the fluffy center of the flower is made. And using the “Puff Puff” technique“The lower petal part of the marigold flower is made of paper (templates with five-leaf silhouettes). Photo instructions for assembling the flower are below.
But here is a rosehip flower - where the stamen and the middle are also combined using the rolling twist technique and 2 petal layers. By the way, you can make them in large sheets of A4 format and stick them on the wall - and your living room will be transformed. Buy a pack of red office paper from the stationery store and play interior designer. All the neighbors will come running to gasp with delight.
But here is a flower craft where the roll technique is also used to create a fluffy panicle-stamen, and the side petals are simply glued separately onto the lower layers of the fluffy panicle-stamen.
You get large sunflowers from crepe paper.
Using a similar ROLL-BUNK + INDIVIDUAL PETAS technique, you can also make a daffodil flower with your own hands.
But these flowers, EITHER LILAC OR SALVIA - with a long stem of inflorescences, are also made using the roll technique.
Yes, yes, this is also a regular roll technique, with the only difference being that the strip of paper is not rolled into a tube, but wrapped around in a spiral roll around a long stick.
Here in the photo below is a master class of this lush paper flower.
- A wide strip of crepe (corrugated) paper cut into long fringe.
- We wrap the fringes on a toothpick(or a knitting needle) - and we get curls along one edge of the ribbon.
- We take a long wooden skewer and wrap our paper ribbon with curly fringe around it - the wrapping begins from the upper end of a wooden skewer and goes down in a spiral.
- We do it under the flower green wrapping skewer and glue wide green leaves to this stem.
Paper rose flowers
FOLDING method.
Using the roll technique, you can quickly roll up a paper rose. We will have a separate article on paper roses. But I will give two master classes right here - because they cover the roll technique of creating flowers.
Here is the first step-by-step paper rose master class. Thick paper is used here, and in order for the petal parts to have the geometry of broken pink petals, this thick paper strip needs to be PUMPED AND TWISTED around itself during the process of rolling into a roll.
And don't pay attention to these centimeters... Just take it the very essence this instruction. Cut a strip of paper from the draft and try to twist it into a rose, simply bending the strip as God wishes - the paper itself will tell you where to bend and turn it.
You will find many other options for making a paper rose from different types of paper in the article
And here's another way Roll up a roll of paper so that it looks like a rose. For such a roll, we need a paper strip NOT IN A STRAIGHT SHAPE, but to make a strip of paper IN THE SHAPE OF A SPIRAL.
Enough for this draw a snail on a sheet of cardboard(uneven curve, no matter what). This drawn spiral will be the template for our paper flower.
Now this spiral line needs to be cut and then start twisting the roll NOT FROM THE MIDDLE OF THE SPIRAL... but rather FROM ITS EDGE. And a paper rose will appear in our hands by itself.
My advice, do not use glazed slippery glossy paper for this rose craft.– such an elastic rose will strive to turn around or the spiral circles will slip out of the flower’s bed. It is better to choose rough paper or not very thick cardboard - this way the rose will better hold its shape.
Paper flowers
Method No. 3
Using the POMPOM technique.
Here's an even faster way to create a fluffy, voluminous flower. It is made using the pompom technique - from corrugated crepe paper
This technique is good because it allows you to very quickly make large flowers from paper - since crepe paper is sold in large rolls (like wallpaper). And each roll can turn into a large flower for holiday decoration.
The master class in the photo below shows how to make such a lush paper flower with your own hands. We fold a wide (20 cm wide) ribbon several times to create many layers. We cut the folded ribbon into fringe from TWO EDGES, leaving the middle intact.
We fluff the fringe of the flower in all directions - achieving the shape of a perfect circle. And we decorate the central part of the flower with a wad of black paper - and the flower resembles a disheveled poppy.
As you understand, the height of the petals depends on the length of the fringe. And the shape of the petals depends on the shape of the fringe.
Below (paper flower master class) we make anemones using exactly the same pompom technique. The difference is that we slightly changed the shape of the fringe - it’s not even a cut fringe at all, but just a beautiful curly petal edge of the napkin.
As a result, the fluffy flower no longer becomes a poppy - but a delicate anemone made of paper.
Is it absolutely possible? do not change the edge shape- that is, do not cut it or fringe it at all. Leave it flat, as it is on a napkin. Just lightly color it with a marker.
And using the same technique, we make a pompom flower with our own hands. They pinched it with wire, folded it in half, fluffed it up and got a carnation on a wire stem.
It remains to add elements from green paper - receptacle(wrap a jagged roll around the flower bowl), stalk(long green strip for wrapping the stem of the flower), leaves (long oval ones glued to the stem).
You can also make this pom-pom flower two-color with a center of a different color (see photo below). To do this, we need paper strips of two colors - one wide (yellow), and the second 2 times narrower (black).
We prepare the strips - first we cut a wide strip onto a double-sided fringe (or a patterned edge on both sides), then we make patterned edges on both sides on a narrow strip.
To make a patterned petal edge– you need to fold the strip into an accordion (as fans were made in childhood) and make a rounding on both sides of this folded fan with scissors.
After unfold the strips and put a narrow black stripe to the middle of the wide yellow stripe. We fold them again like an accordion (this time two-color).
We tie it with twine or wire. And we unfold the sides of the fan in a circle - a flower is formed. If desired, the center of the flower can be decorated with crumpled paper or cut fringe, glued between the blades of the black center.
And here is a master class that shows how to make a paper pom-pom flower WITH A FRINGED stamen with your own hands (photo instructions below).
The principle of creating this flower from paper of two colors is the same as in the previous master class. Only here the middle strip is shredded on both sides into small fringes. This is another way to make large flowers using crepe paper.
Method No. 4
Paper flowers
Twisted on a ball.
Here's another way to create flowers from crimped crepe paper.
To make such paper flowers you need wide short strips of crepe paper and balls of different sizes (lollipops, balls). We place the ball on the strip and hug the ball with the strip on both sides - we twist the tails and ends of the strip into a tight flagellum. Carefully remove the ball, trying not to crush the inflated petal template. We make several of these petals and collect them into a lush flower.
Using the same principle, rounded crocus petals are made from corrugated paper (photo below). Here you need a longer paper strip - it is placed on the ball with one half. The other half twists at the top of the ball and goes back behind the back of the ball and lies on top of its first half. The result is a rounded petal.
If you put these petals close to each other, you will get a cup of a closed crocus flower (as in the photo below). Excellent craft-flowers for March 8th for mom.
You can make a lot of bouquets from crepe corrugated paper. Including bouquets of sweets.
Method No. 5
FLOWERS made of paper
Using ORIGAMI technique.
And now we will talk about folding flowers from paper - without any cutting with scissors. That is, about the art of origami.
The first model is flowers with conical petals. They are so handsome. Each petal of such a flower is made from a simple square of paper. Using simple origami technique.
All the finished petals are glued to each other - and a beautiful rhinestone-stone is placed in the center of the gluing.
These craft flowers are very easy and quick to make yourself – and they look very elegant on gift wrapping. You can even decorate a Christmas tree with them.
As soon as you pick up a square of paper and look at the master class below, you will immediately make the same petal. It’s very simple – you start doing it and you understand everything along the way. And you are surprised that this is not taught in kindergarten - everything is so simple and accessible to the common person. After module 10, when the entire pattern of the flower has already been absorbed into your subconscious, your hands already do everything almost blindly - automatically.
If you take a roll of plain wallpaper as paper and cut it into large squares, you can get large-sized flowers to decorate a room or decorate a home celebration.
And also due to the fact that these flowers have the shape of a CONE, it is convenient to collect them into one common large ball. And use it as a pendant. Or as a crown for a decorative tree (which is usually used to decorate weddings).
Here is a master class on a large water lily and paper folding techniques without cutting.
But here is an interesting method where the petal modules are made separately, and then each module is not glued, but simply inserted into the grooves of the adjacent module.
These handmade paper flowers can be an excellent craft for any occasion. You can now make paper flowers using different techniques and teach it to your children. You can use these ideas for holiday decorations or for activities in the Skillful Hands group. Such flowers are suitable as crafts for the Spring competition at school or kindergarten. Or these flowers can be a gift for mom on March 8th - a bouquet of paper flowers made by yourself.
Lots of simple ideas for children's crafts on the theme of flowers you will find in our other articles:
Happy crafting!
Olga Klishevskaya, especially for the site
This paper flower tutorial uses photographs from the following sites: http://www.wikihow.com http://www.instructables.com http://tipnut.com http://www.twopinkcanaries.com http:// www.marthastewart.com http://vivatunisie.com http://www.linazlina.com
Of course, nothing compares to fragrant flowers, but they fade. Therefore, paper flowers can be an excellent alternative to a bouquet of living plants. They will become an exclusive decoration for your home or an unexpected gift for loved ones for a long time. And by the way, they will cost less than fresh flowers. All you need is paper, decorative elements, your imagination and desire to create.
How to find a use for paper flowers
The advantage of paper flowers is that they will help transform almost any interior - from Provence to Art Nouveau. Depending on the style of the room, you can decorate a candlestick, shelves, clock with flowers, or simply put them in a vase. It's all about your imagination. An ordinary wreath made of wicker branches will look very original if decorated with paper flowers. This composition will fit perfectly into almost every room, but perhaps it will look most impressive on the front door or in the bathroom.
If you are the happy owner of your own home, then you have even more options for decorating. For example, you can decorate stair railings with garlands of homemade paper flowers.
Of course, such compositions are suitable for every day, but they will look especially good for any holiday. So, depending on whether it is Easter or New Year, or maybe a birthday, you can create the most suitable composition from improvised flowers. They can decorate a holiday table or a gift.
Almost any flower can be made from paper. But it’s better to start with the simplest options, such as a paper rose. In this case, you can make both a large and a miniature version.
Crafts made from plain paper
For beginner origami lovers, as well as for already advanced masters, one of the most basic, but at the same time effective craft options is a rose made from plain paper.
Prepare in advance:
- thick sheet of paper
- scissors
Detailed instructions:
- Cut out a circle from paper. The most preferred diameter is 15-20 cm
- Cut the resulting shape in a spiral, as shown in the figure below.
- Starting from the outer edge, roll the paper very tightly
- Lightly straighten the improvised petals
- Glue the resulting flower to the inner edge of the spiral
Advice! Select colored paper in a shade that suits you in advance. But you can paint the finished rose with gouache.
These roses can be used to decorate a wreath, photo frame, or dry twigs.
Masterpieces made of corrugated paper
Another decoration option that is also suitable for novice designers is a rose made of corrugated paper.
Stock up on the following materials in advance:
- one or more multi-colored sheets of corrugated paper
- scissors (manicure scissors are ideal)
- toothpick
- circle for cutting out of cardboard
detailed instructions
Cut out 12 circles from paper
Advice! To get a perfect circle, use templates, which can be a coin or other object of a similar shape. Templates can also be printed from the Internet.
We sharpen one edge of the circle and glue it together. We get a kind of petal of a future rose
Glue the petals to the cardboard circle. To do this, we first start gluing the outer edge (five petals will go here). Glue the next four petals inside, and decorate the inside of the circle with three petals.
Cut a small strip of corrugated paper about 3 cm wide and fold it lengthwise. Using scissors, cut it at equal distances. As a result, a kind of mini-fringe is formed. It needs to be fluffed up.
Wrap the resulting fringed strip around the toothpick in a spiral. Secure with glue and attach to the petals. We have the core of the flower.
The resulting flowers can be placed on a toothpick.
Volumetric large flowers
So, you have learned how to make basic flowers. Now you can move on to something more complicated. The next master class will allow you to make voluminous flowers with your own hands using corrugated paper and candy. As a result, you will get an original and delicious gift with which you can surprise even the most sophisticated relative or friend.
By following our instructions, you can create unique snowdrops with a delicious center.
Stock up on the following materials in advance:
- candies in beautiful packaging made of shiny foil;
- white and green corrugated paper;
- toothpicks (choose longer ones);
- scissors (preferably thin and sharp, like manicure scissors);
- glue;
- flower basket;
- a piece of foam plastic the size corresponding to the bottom of the basket;
- Organza or green mesh;
- Artificial grass or spruce branches
Detailed instructions on how to make voluminous delicious snowdrops
- Take four strips for each flower measuring 4x16 cm. Use white corrugated paper for this. Twist the strip in the center and bend it in two
- Insert a toothpick into the center of the candy. Glue petal strips to it.
- Treat the improvised stem. To do this, wrap a strip of green crepe paper around the toothpick below the candy and petals, moving in a spiral. Secure it with glue as shown in the diagram.
- Let's start making sheets. We will need organza or mesh. We cut out a square measuring 15x15 cm from it. We slightly round its corners. Pierce it in the center with scissors and insert the stem of the resulting flower. Use glue to form a small wave. It will act as a bend in the leaf.
- Place polystyrene foam at the bottom of the basket and place the resulting flowers in it. Decorate the composition with artificial grass.
You will get this little masterpiece.
Plain or crepe paper can be used to make both small and large flowers. You will need a minimum of materials, but the effect can exceed all expectations.
